How should air-heated bathroom heater be maintained and cleaned? Maintenance of air-heated bathroom heater 1. Note that the thickness of the bathroom heater should not be too large. When purchasing, consumers must pay attention to the thickness of th...
air-heated bathroom heater be maintained and cleaned? Maintenance of
air-heated bathroom heater
1. Note that the thickness of the bathroom heater should not be too large.
When purchasing, consumers must pay attention to the thickness of the bathroom heater not too large, generally around 20 cm. Because the bathroom heater needs to be installed on the roof, if you want to install the bathroom heater, you must add a layer of roof below the roof, which is what we often call PVC ceiling or integrated ceiling, so that the rear half of the bathroom heater can be sandwiched between the two roofs. If the bathroom heater is too thick, it will be difficult to decorate.
2. The bathroom heater power distribution system must be standardized. The power of the bathroom heater can reach more than 1100W. Therefore, the power wiring for installing the bathroom heater must be a waterproof wire, preferably a multi-wire copper core wire that is not low to dry 1mm. All power wiring must be inlaid with plastic concealed pipes in the wall, and there must be no open wire settings. The power control switch of the bathroom heater must be a qualified product with a waterproof capacity of more than 10A, especially when installing a bathroom heater in an old house, pay more attention to specifications.
3. Install the bathroom heater in the center at the top of the bathroom.
or slightly close to the bathtub, which is both safe and maximizes the functionality.
4. Avoid frequent switches and vibrations around them.
Do not switch the bathroom heater frequently when using it. Do not have large vibrations around the bathroom heater during operation, otherwise it will affect the service life of the heating bubble. If abnormal situations occur during operation, it should be stopped immediately and cannot be dismantled and repaired by yourself. It is necessary to clear the professional and technical personnel of the after-sales service and maintenance department for maintenance.
5. Water spraying is prohibited when working in bathroom heaters.
When using it, special attention should be paid: Although today's bathroom heaters are waterproof, they must not be splashed with water when they are actually used. Although the waterproof bulbs of bathroom heaters have waterproof properties, the metal accessories in the body cannot do this, that is, the metal in the body is still conductive. If water is splashed with it, it will cause dangers such as short circuits in the power supply.
6. Keep the bathroom clean and dry.
Do not turn off the bathroom heater immediately after bathing, wait until the moisture in the bathroom is discharged before turning off the power; you should also keep the bathroom ventilated, clean and dry frequently to extend the service life of the bathroom heater.
Cleaning of air-heating bathroom heater
1. When using the bathroom heater for a long time, the switch panel is stained. When cleaning these stains, you should first cut off the power (neutral wire and phase wire). When confirming that there is no power, take off the light bulbs in the bathroom heater one by one and wipe it with a rag stained with a small amount of neutral detergent. After the stain is wiped off, then wipe it dry with a cleaning cloth.
2. Remove the pull spring, which means there are 4 springs on the four corners of the bathroom heater box. You need to remove it. And use neutral disinfectant or cleaning agent to wipe the surface of the bathroom heater and the surface of the light bulb. After all, the inside of the chassis must be wiped clean. Although the chassis is fixed to the roof, in order to ensure the service life of the bathroom heater, it must be thoroughly cleaned.
