How to wash fur

Wearing a piece of fur will improve a person's temperament and give others a noble and warm feeling. Therefore, many friends now prefer fur. Indeed, fur is a symbol of a person's nobility. But fur is the easiest thing to get dirty, and it is not so easy to clean. So do you know how to wash fur? How to wash the fur so that it will not harm it?

Regarding the cleaning of fur, the cleaning method is different due to the different types of skin materials. Furs include minks, sheepskins, etc. The materials of furs are different, and the cleaning methods are also different. How to wash different types of furs? Let’s take a look at the introduction of the article on this issue.

High-end fur cleaning (mink).

Detergent powder: magnesium oxide powder, talc powder. Ratio 1:1

Washing method: Spread the fur flat on the washing table, apply the quilt evenly with sponge dipped in powder, apply the quilt repeatedly, let it sit for 24 hours, use a brush to clean the quilt powder, then put the fur on the portrait air mold, rinse the powder with an air spray gun, and use a dense toothed comb to unclog the quilt in the direction.

Ordinary fur cleaning (skin).

Detergent solvent: 95% alcohol Common dosage: 200-250ml

Detergent powder: talc powder Common dosage: 500-1000g of talc powder

Washing method: Put the fur on the portrait air mold, use an air spray gun to uniformly atomize the alcohol solvent on the matte, apply the sponge dipped in powder repeatedly, supplemented with light rubbing, clean the matte powder with a hair brush, then use an air spray gun to clean the powder, and use a dilute comb to untidy the matte in the direction.

White plush yellowing treatment.

Washing solution: hydrogen peroxide, water ratio 1:10

Washing method: Put the fur on the portrait air mold, use an air spray gun to uniformly atomize the solution on the mattress, wet it thoroughly for 5 minutes, use a short-haired brush to dip the solution and gently brush it from top to bottom, and finally use a clean water spray gun to rinse the mattress, place it in a ventilated and cool place to dry, and unclog the mattress in the direction.

Light-colored plush grey treatment.

Washing solution: >90# gasoline, 25% ammonia water, ratio 1:1

Washing solution: Put the fur on the portrait air mold, use an air spray gun to uniformly atomize the solution on the mattress, wet it thoroughly for 5 minutes, use a short-haired brush to dip the solution and gently brush it from top to bottom, and finally rinse the mattress with a clean water spray gun, place it in a ventilated and cool place to dry, and unclog the mattress in the direction.

Light plush glossy and dull treatment.

Washing solution: acetic acid (white) or glacial acetic acid, water, ratio 1:1 or 1:2

Washing method: Put the fur on the portrait air mold, use an air spray gun to atomize the solution on the mattress, atomize it once every 5 minutes, repeat 3-5 times, preferably with a fully wet hair and a water mist, let it stand for 15 minutes, then wipe and clean it from top to bottom, and place it in a ventilated and cool place to dry.

Fur stale treatment.

Washing solution: alum, salt, softener, water, ratio 2:1:1:300 Water temperature is 40-50℃, commonly used dosage: 100 grams of alum, 50 grams of salt, 50 grams of softener, 1500 grams of softener.

Washing method: Put the fur in solution and soak for 15-20 minutes, let it penetrate into the leather fully, rub and knead with moderate strength, the leather can be repeatedly brushed with a brown brush, rinsed clean with clean water, and placed in a ventilated and cool place to dry.

The above article explains how to wash fur. Some of the chemicals explained in the article are common in our daily lives. When cleaning fur, you must follow the steps introduced above to clean the fur so that you can better clean the fur. Of course, we can also take the fur to a special cleaning shop to clean it, which will further contribute to the life of the fur.